Featured Products

  • ZINC FIREPROOF COMPOSITE PANEL

    ZINC FIREPROOF COMPOSITE PANEL

    Advantages Surface materials and thermal insulation materials are non-combustible materials, which can fully meet the requirements of fire protection regulations for prefabricated houses. Various studies have shown that it has been widely used in foreign countries for more than 40 years. The shelf life of color steel plates treated with special coatings is 10-15 years, and later Spray anti-corrosion paint every 10 years, and the life of the prefab board can reach more than 35 years. The clea...

  • STAINLESS STEEL FIREPROOF MENTAL COMPOSITE PANEL

    STAINLESS STEEL FIREPROOF MENTAL COMPOSITE PANEL

    Product Description Alubotec stainless steel laminated with galvanized steel directly, the panel thickness can be 5mm. It maintains the stainless steel’s brightness, hardness, wear and corrosion resistance and other characteristics of the product while ensuring its high strength, bending tensile, impact resistance and other mechanical properties, also possesses a good shock absorption, noise reduction, insulation characteristics. The panel can be used directly to replace most of the sectors o...

  • COPPER FIREPROOF COMPOSITE PANEL

    COPPER FIREPROOF COMPOSITE PANEL

    Product Description Copper composite panel is a building material, with copper and aluminum panels as its front and back panels. The core material is Class A fireproof board. Different ingredients such as alloys or levels of oxidizing agents make the copper color different, so the finish color of natural copper/brass cannot be controlled and should vary slightly from batch to batch. Natural copper is bright red. Over time, it will turn dark red, brown and patina. This means copper has a long ...

  • FR A2 ALUMINUM COMPOSITE PANEL

    FR A2 ALUMINUM COMPOSITE PANEL

    Product Description NFPA285 Test Alubotec® Aluminium Composites (ACP) are made by continuously bonding two thin aluminium skins on both sides of mineral filled flame retardant thermoplastic core. The aluminium surfaces are pre-treated and painted with various paints before lamination. We also offer Metal Composites (MCM), with copper, zinc, stainless steel or titanium skins bonded to the same core with a special finish. Both Alubotec® ACP and MCM provide the rigidity of thick sheet metal in...

Recommend Products

WOOD GRAIN PVC FILM LAMINATION PANEL

WOOD GRAIN PVC FILM LAMINATION PANEL

Product Description It is also eco-friendly, odorless, non-toxic, healthy, waterproof, non-fading, anti-corrosion, scratch-resistant, moisture-proof, easy to clean, high hydrophobicity, high tensile strength and elongation at break. At the same time, it has the characteristics of high UV resistance and high weather resistance, which Effectively prolong the service life of profiles. A variety of styles and colors are available, beautiful and fashionable, with bright colors. It is commonly used...

AUTOMATIC FR A2 CORE PRODUCTION LINE

AUTOMATIC FR A2 CORE PRODUCTION LINE

Machine Main Technical Data 1. Raw material Environment protection FR non-organic powder&Special water miscible liquid Glue&Water: Mg(oh)2/Caco3/SiO2 and other non-organic powder ingredients as well as Special water miscible liquid glue and some percentage of water for the formula details. Non-woven fabrics film: Width: 830~1,750mm Thickness: 0.03~0.05mm Coil weight: 40~60kg/coil Remark: Firstly start with 4layers of non woven fabrics film and top for 2layers and bottom for 2layers,...

COMPARISON TABLE (FR A2 ACP COMPARED WITH OTHER PANELS)

COMPARISON TABLE (FR A2 ACP COMPARED WITH OTHER...

Product Description Performance Class A Fireproof Composite Metal Panels Single Aluminum Plate Stone Material Aluminum Plastic Composite Panel FLAME RETARDANT Class A fireproof metal composite plate is used with fireproof mineral core, at extreme high temperatures that it will not ignore, help to combust or release any toxic gases, It really achieves that there is no falling objects or spread when the products is exposed in fire. Single Aluminum Plate mainly made of aluminum alloy ma...

FR A2 CORE COIL for PANELS

FR A2 CORE COIL for PANELS

Product Description ALUBOTEC is in the upstream position in the industrial chain and has a large initiative. At present, the product technology is in the leading position in China. The products are not only sold to several domestic provinces and cities, but also exported to more than 10 other countries and regions in the world. Compared with the main domestic and foreign competitors: so far, few domestic companies have developed production equipment that can produce A2 grade fireproof core r...

NEWS

  • Exploring the Advantages and Applications...

    Introduction: In today’s building materials market, Fr A2 aluminum composite panels have become the material of choice for numerous corporate construction projects due to their exceptional performance and versatility. These innovative composite materials offer not only outstanding durabilit...

  • Copper Fireproofcomposite Panel – T...

    In today’s business landscape, the safety of corporate facilities has become an integral part that cannot be overlooked. Fire, as a common safety threat, poses a significant risk to both corporate assets and personnel. To effectively prevent the losses caused by fires, an increasing number ...

  • ZINC FIREPROOF COMPOSITE PANEL: a new typ...

    Metal composite panel is a kind of composite material composed of two layers of metal panels and one layer of core material, which is widely used in the fields of construction, decoration, transportation, industry, etc. It has the advantages of lightweight, high-strength, beautiful, and durable, ...

  • Why do underfloor heating wood floors crack?

    With the popularity of underfloor heating, many families are enjoying the comfort it brings, but they have also discovered a troubling problem: cracks in the underfloor heating wood floor. Why is this? Today we will find out, for you to reveal the floor heating wood floor cracks behind the hidden...

  • Questions to consider when selecting the ...

    One of the main components of wainscoting is the molding finish, which is also a component that occupies a large proportion of the overall wallboard. Modeling face is mainly composed of left and right edge spike, up and down the pier (according to the wall panel length w...