English

Product Center

Newly Arrival Fluorocarbon Aluminium Panel - AUTOMATIC FR A2 CORE PRODUCTION LINE – BOTEC Featured Image
  • Newly Arrival Fluorocarbon Aluminium Panel - AUTOMATIC FR A2 CORE PRODUCTION LINE – BOTEC
  • Newly Arrival Fluorocarbon Aluminium Panel - AUTOMATIC FR A2 CORE PRODUCTION LINE – BOTEC
  • Newly Arrival Fluorocarbon Aluminium Panel - AUTOMATIC FR A2 CORE PRODUCTION LINE – BOTEC
  • Newly Arrival Fluorocarbon Aluminium Panel - AUTOMATIC FR A2 CORE PRODUCTION LINE – BOTEC

Newly Arrival Fluorocarbon Aluminium Panel - AUTOMATIC FR A2 CORE PRODUCTION LINE – BOTEC

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

With state-of-the-art technologies and facilities, strict good quality regulate, reasonable cost, exceptional assistance and close co-operation with prospects, we're devoted to supplying the top benefit for our customers for Composite Panel Colours, Aluminium Composite Panel Interior Design, Acp Cladding Sheet Size, We are willing to give you the best suggestions on the designs of your orders in a professional way if you need. In the meantime, we keep on developing new technologies and creating new designs so as to make you ahead in the line of this business.
Newly Arrival Fluorocarbon Aluminium Panel - AUTOMATIC FR A2 CORE PRODUCTION LINE – BOTEC Detail:

AUTOMATIC FR A2 CORE PRODUCTION LINE02
AUTOMATIC FR A2 CORE PRODUCTION LINE03

Machine Main Technical Data

1. Raw material
Environment protection FR non-organic powder&Special water miscible liquid Glue&Water: Mg(oh)2/Caco3/SiO2 and other non-organic powder ingredients as well as Special water miscible liquid glue and some percentage of water for the formula details.

Non-woven fabrics film: Width: 830~1,750mm
Thickness: 0.03~0.05mm
Coil weight: 40~60kg/coil

Remark: Firstly start with 4layers of non woven fabrics film and top for 2layers and bottom for 2layers, and 2layers of them will be recoiled after conveying the core to the oven and finally the remaining 2layers will stick to the core after melting.

FR A2 CORE PRODUCTION LINE1

2. Finished composite panel
Width: 800-1600mm.
Thickness: 2.0~5.0mm.
Production speed: 1200~2000mm/min(Normally for 1800mm/min).
Calculation based on: width of 1240mm*(3~4mm) (adjust as per product’s thickness); raw material/formula/production technique/operation skill can effect the production speed.

3. Production line cooling water requirement (recycling)
Q= 0.5-1.5M3/H; P=Normally for 0.7KG/CM2, (design for 0.5~2kg/cm2 ).
Input temp T1: ≤20℃,  ≥0.3Mpa, hardness: 5-8odH.
Mainly used for powder mixing and combination of the formula and water AC cooling recycling and machine front parts-cleaning and other small quantity of recoiler magnetic brake application.

FR A2 CORE PRODUCTION LINE2

4. Total energy consumption: (230/400V)/3 phase/50HZ.
Power Supply: Installed capacity for FRA2 class: 240kw (actual energy consumption around 145kw).
Electric cabinet working environment: temp & humidity  ≤35℃, ≤95%.
Gas supply: Totally for 6ovens and about 110M3/H for the gas requirement(LPG or LNG),averagely for 78M3/H.

AUTOMATIC FR A2 CORE PRODUCTION LINE034

5. Total Compress Air volume
Q=0.5~1m3/min P=0.6~0.8Mpa
Air Consumption: Screw Type of Air Compressor with ≥1m3 air storage tank and motor of≥ 11KW

AUTOMATIC FR A2 CORE PRODUCTION LINE04

6. Size of the unit
Length* width* height (m): 85m*9m*8.5m(Front platform of the machine for 8.5m )
Total weight (approximately): 90 tons
Factory size (reference)
Length * width (m): 100*16
Crane: lifting capacity 5 tons

Product detail pictures:

Newly Arrival Fluorocarbon Aluminium Panel - AUTOMATIC FR A2 CORE PRODUCTION LINE – BOTEC detail pictures

Newly Arrival Fluorocarbon Aluminium Panel - AUTOMATIC FR A2 CORE PRODUCTION LINE – BOTEC detail pictures

Newly Arrival Fluorocarbon Aluminium Panel - AUTOMATIC FR A2 CORE PRODUCTION LINE – BOTEC detail pictures

Newly Arrival Fluorocarbon Aluminium Panel - AUTOMATIC FR A2 CORE PRODUCTION LINE – BOTEC detail pictures

Related Product Guide:
Our advantages are reduced prices,dynamic product sales workforce,specialized QC,solid factories,superior quality services for Newly Arrival Fluorocarbon Aluminium Panel - AUTOMATIC FR A2 CORE PRODUCTION LINE – BOTEC , The product will supply to all over the world, such as: Provence, Jersey, America, What is good price? We provide customers with factory price. In the premise of good quality, efficiency will have to be paid attention to and maintain appropriate low and healthy profits. What is a fast delivery? We make the delivery according to customers' requirements. Although delivery time depends on the order quantity and the complexity of it, we still try to supply products and solutions in time. Sincerely hope we could have long term business relationship.
    • We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
    5 Stars By Agatha from Costa rica - 2017.06.22 12:49
    Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
    5 Stars By Afra from Karachi - 2017.05.02 11:33
    Write your message here and send it to us

    Related PRODUCTS

    Hit enter to search or ESC to close